微机消防系统中气体灭火联动方式的实例探讨 The Research about the Co-operative Methods between the Fire Alarming System and the Gas Extinguishing System 胡显华 Hu, Xianhua [Abstract] this article gives a further explore on the two co-operating methods between the fire alarming system and the gas extinguishing system. Through an actually engineer experience, discusses each method ’s application range, its advantage an
监控及消防系统改造工程 -气体灭火系统设备及安装 山东省住建厅办公楼一层设有两处档案室,面积分别为 63 平方米及 19 平方米, 采用密集档案货柜存放有大量纸质材料,具有 A 类(即固体火灾)的特点,为保证其 消防安全,消除火灾隐患,设置非爆破式非储压式超细干粉自动灭火系统,设计喷射 密度大于 0.13Kg/m3。该系统选用 6具粉剂充装量为 8kg的灭火装置,采用悬挂式安装, 配合温控模块、手启延时模块能够实现自动、手动及系统联动三种启动控制方式,并 可同时实现无源自发组网联动,保证档案室的消防安全。 在自动模式下,当防护区发生火灾时,环境温度达到温感启动器公称动作温度 (≥70℃) 时,灭火装置接收到启动信号,固气转换剂被激活,壳内气体迅速膨胀,内部压力增 大,将喷嘴薄膜冲破,超细干粉向保护区域喷射并迅速向四周弥漫,形成全淹没灭火 状态,火焰在超细干粉连续的物理、化学作用下被扑灭。在